Tire Handling SERIES

 We can design, manufacture, test, program, install and support a system that provides world-class support for tire handling operations.

 

Hilmot's Tire Handling Series modules are available in the widths, lengths and zones you need for your high-speed, heavy duty distribution job. Pre-wired conveyor sections are networked with bus technology and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system that is easy to maintain.

 

-Product line is capable of handling single tires or stacks

-Product line is capable of handling a wide variety of widths and heights simultaneously

-All MDR zones utilize poly v transmission for increased durability and product longevity

-The side frames are powder coated with a heavy duty 10 gauge standard

-The cross members are C channel heavy duty rated

-All 480V motors have a brake included

-All 480V motors have a soft start or VFD depending on the application

-All I/O is networked together for system diagnostics and visibility in supervisory system

MDR Straight (Intermediate)

 

Frame Type

Rollers Set Low (RSL) – Cable trays route wires within the bed frame, which also acts as guard railing; protects photo eyes (moved RSL to top) With Optional Skate wheel guardrail

 

Typical Applications

 

Poly-V:

  • Medium to heavy loads up to 400 lbs.

  • Minimal coast

  • Ideal for harsh environments like tire handling and manufacturing

 

 

SPECIFICATIONS

Between Frames Width (BF):

24”, 27”, 30”, 33”, 36”, 39”, 42” (overall width is 3” wider than the BF)

 

Zone Length:

24”, 30”, 36”, 48” (actual zone length is application specific and is determined by length and weight of the product)

 

Bed Section:

  • 7.5” side channels

  • Punched on 1” or centers to accommodate multiple roller centers: 2”,3”

  • Smoked colored side cover or facia

 

RSL – 7.5” tall rail, rollers are 2”, set low in rail

 

Rollers:

  • 2.5” center rollers standard

  • ABEC high-speed bearings

  • Quantity varies upon required torque and torque availability.

  • Poly-v end cap and bands to increase drive capability

 

Drive Rollers:

  • Motorized rollers 24VDC brushless, geared or gearless

  • 1.9” diameter, set to 120 ft / min (adjustable from 10 ft/min to 150 ft/min)

  • Basic version drive card – Two zone built in zero pressure accumulation (ZPA) logic

  • Plus version drive card – Two zone controller with built in ASi

  • Includes wire harness and motor control card

 

Sensor:

  • Zone photo eye set 6” back on standard

  • Built-in photo eye, one per zone

 

Conductive powder coat paint in standard Blue RAL 5001

 

PRODUCT OPTIONS

PLC- or PC-based control or platform

Poly coated rollers for reduced friction

2” center rollers for smaller diameter tires

Other speeds available

Other colors available (see page xx)

Zone photo eye can also be set 3” or 9” back

Inquiries? Go Here

  • LinkedIn Clean
  • w-facebook
  • YouTube Clean
  • Twitter Clean

Shop The Hilmot

E-commerce Store

Hilmot, LLC | 11925 W Carmen Ave Milwaukee, WI 53225  | 414-446-4900

© 2019 by Hilmot LLC