Hilmot's straight modules of conveyor are available in many widths, lengths and zones. The 7-1/2" deep side channels utilize the profile of Hilmot's conveyor families. The cable trays are utilized for routing wires within the bed frame. The side channels are punched on 1-1/2" centers to accommodate multiple roller centers. The available roller centers are: 3", 4", 6", and 9". Quantity of motorized rollers will vary depending upon required torque and torque availability. Drive rollers are grooved to accept high tension urethane O-rings to transmit the torque to the idler rollers. Idler rollers are made with plated shells. The straight modules are available in Hilmot standard widths: 15", 18", 21", 24", 27", 30", 33", and 36". Multiple lengths are available from 2' to 10'. Zone lengths are determined using factors such as length and weight of the product and are therefore application-specific.

 

  • Built-in photo eye, one per zone

  • Pre-wired, networked with bus technology

  • Motorized rollers 24VDC brushless, geared or gearless

  • Shroud or fascia

  • PLC- or PC-based control or platform

  • Precision bearings in the idler rollers

  • 60 lb Capacity

Intermediate Module

Series 1000 - Standard MDR
Show More

Inquiries? Go Here

  • LinkedIn Clean
  • w-facebook
  • YouTube Clean
  • Twitter Clean

Shop The Hilmot

E-commerce Store

Hilmot, LLC | 11925 W Carmen Ave Milwaukee, WI 53225  | 414-446-4900

© 2019 by Hilmot LLC