Hilmot's spur modules are offered in 30° spur mounted in either the right hand (RH) or left hand (LH) merge position. The merge rates are up to (30 cases per minute). The mainline merge module is 90", 108in, or 144in long consisting of three 30" zones, three 36in zones, or four 36in zones depending on the Between Frame. Hilmot's standard widths: 15", 18, 21", 24", 27", 30”, 33”, and 36" widths. The 7-1/2" deep side channels on both the spur(s) and the bed continue the same Hilmot profile. Cable trays are utilized for routing wire within the bed frame. Drive rollers are grooved to accept hi tensioned urethane O-rings to transmit the torque to the idler rollers that complete the zone length. The idler rollers are made with flow coat galvanized tubing. All Hilmot MDR products come standard with:


  • Built-in photo eye, one per zone

  • Pre-wired, networked with bus technology

  • Motorized rollers are 24VDC brushless

  • Standard frame cover both sides

  • PLC- or PC-based control or platform

  • ABEC rated precision bearings in the idler rollers

  • 75 lb Capacity

Merge Module

Series 1000 - Standard MDR

Inquiries? Go Here

  • LinkedIn Clean
  • w-facebook
  • YouTube Clean
  • Twitter Clean

Shop The Hilmot

E-commerce Store

Hilmot, LLC | 11925 W Carmen Ave Milwaukee, WI 53225  | 414-446-4900

© 2019 by Hilmot LLC