Hilmot Products

1500 SERIES

MDR STRAIGHT 
(RSL)

Hilmot MDR Straight modules are available in the widths, lengths and zones you need for your high-speed, light
to medium duty distribution system.
Pre-wired conveyor sections can be networked with a variety of technologies and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system that is easy to maintain. Zero pressure accumulation
is standard. 

MDR

CURVE

Hilmot MDR curve modules are available in widths and degrees you need for your high-speed, light to medium duty distribution system. Pre-wired conveyor sections can be networked with a variety of technologies and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system that is easy to maintain. Zero pressure accumulation is standard. 

MDR STRAIGHT

(RSH)

Hilmot MDR Straight modules are available in the widths, lengths and zones you need for your high-speed, light
to medium duty distribution system.
Pre-wired conveyor sections can be networked with a variety of technologies and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system that is easy to maintain. Zero pressure accumulation is standard.
 

MDR SPUR

Hilmot MDR Spur modules are a 30°
or 45° spur that can be placed nearly anywhere on a new or preexisting system. Preprogrammed with zipper merge program. Built in and factory-mounted guard rail are included. Pre-mounted
in-frame photo eyes are prewired and protected from product. No pneumatics required. The all 24VDC electric operation ensures a consistent and quiet system that is easy to maintain. 

MDR SPUR CURVE

Hilmot MDR Spur Curve modules deliver
a convenient solution for consolidation applications and have a 30° spur for tighter footprints. Preprogrammed with zipper merge program. Built in and factory-mounted guard rail are included. Pre-mounted in-frame photo eyes are prewired and protected from product.
No pneumatics required. The all 24VDC electric operation ensures a consistent and quiet system that is easy to maintain. 

MDR LIFT GATE

Hilmot MDR Lift Gate modules provide safe egress breaks in the conveyor line that are strategically placed for pedestrian or push cart traffic. Typical gates consist of a 36” pivot bed with 12” tangents; adding a clear distance for a walk way. Other sizes and swing gates are available upon request. All lift gates come with gas springs to assist the user in moving the gate up or down. Pre-wired conveyor sections are networked with a variety
of technologies and are easily configured for multiple applications. 

MDR MERGE

Hilmot MDR Merge modules provide a 30° spur for merging. It attaches to a machine conveyor to achieve a high-rate of 40 cases per min. The units are modular and come preassembled as one unit (both spur and mainline). Built in and factory- mounted guard rail are included.
Pre-mounted in-frame photo eyes are prewired. No pneumatics required.
The all 24VDC electric operation ensures
a consistent and quiet system that
is easy to maintain.
 

HCAT90

Hilmot HCAT90 Transfer modules providea 90° right angle transfer for sortation, distribution or assembly applications. It is powered by 24 volt DC electricity, with rates up to 30 products/min. The HCAT90 utilizes
a total of three MDR to provide motion
of the rollers, belts, and lifting motion. There is no electric actuator or pneumatic cylinder reducing overall
project cost and installation effort.
 

HCAT30

Hilmot MDR Merge modules provide a 30° spur for merging. It attaches to a machine conveyor to achieve a high-rate of 30 cases per min. The units are modular and come preassembled as one unit (both spur and mainline). Built in and factory- mounted guard rail are included.
Pre-mounted in-frame photo eyes are prewired. No pneumatics required.
The all 24VDC electric operation ensures
a consistent and quiet system that
is easy to maintain.
 

SPIRAL CURVE

Hilmot’s spiral curve modules can be
used as a stand-alone elevation change
or combine together to create an inclining
or declining spiral, which allows for an elevation change in a small foot print. The pre-wired spiral curve module has built in zero pressure accumulation and can be networked with bus technology, which enables custom control and fully visible diagnostics. All electric operation ensures
a consistent and quiet system that is easy
to maintain. 

MDR SPIRAL

Hilmot MDR spirals enable major elevation change in a small foot print. This allows height differences to be bridged while retaining a smooth flow of product.
Built in zero pressure accumulation (ZPA) and polyurethane sleeves on the rollers come standard. The modules are also reversible. Pre-wired modules can be networked with bus technology, which enables custom control and fully visible diagnostics. All electric operation ensures a consistent and quiet system that
is easy to maintain. 

DOUBLE
PICK & PASS

Hilmot helps automate traditional pick and pass transfer applications with our new HCAT90 transfer unit design. The Hilmot MDR Double Pick and Pass Transfer module can reach 40 cartons per minute (CPM). This system can route cartons
or totes to zones that require picking; getting product to every operator without stopping. It is fast and efficient; perfect
for pick-to-light or voice-pick systems. 

TRIPLE
PICK & PASS

Hilmot helps automate traditional pick and pass transfer applications with our new HCAT90 transfer unit design. The Hilmot MDR Triple Pick and Pass Transfer module can reach 40 cartons per minute (CPM). This system can route cartons
or totes to zones that require picking;
getting product to every operator without stopping. It is fast and efficient; perfect
for pick-to-light or voice-pick systems. 

WEIGHT SCALE

Hilmot weight scale modules are used
to weigh products as they pass through. They integrate into any process that needs to weigh items on the conveyor line. Using Nema 4X/IP66 stainless steel load cell design, the user friendly interface can do parts counting, check weighing
or shipping. 

MDR BELTED 24"
HORIZONTAL

Hilmot’s MDR Belted Horizontal modules have a high friction belt that holds product in location and helps maintain product alignment, perfect for print and apply applications, small and light products
and bags. Higher angles are possible depending on the application. Pre-wired conveyor sections are networked with bus technology and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system
that is easy to maintain. 

MDR BELTED 24"
DECLINE

Hilmot’s MDR Belted Decline modules have a high friction belt that holds product in location and helps maintain product alignment, perfect for print and apply applications, small and light products and bags. Higher angles are possible depending on the application. Pre-wired conveyor sections are networked with bus technology and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system
that is easy to maintain. 

MDR BELTED 24"
INCLINE

Hilmot’s MDR Belted Incline modules
have a high friction belt that holds product in location and helps maintain product alignment, perfect for print and apply applications, small and light products
and bags. Higher angles are possible depending on the application. Pre-wired conveyor sections are networked with bus technology and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system
that is easy to maintain. 

MDR BELTED 30"
HORIZONTAL

Hilmot’s MDR Belted Horizontal modules have a high friction belt that holds product in location and helps maintain product alignment, perfect for print and apply applications, small and light products and bags. Higher angles are possible depending on the application. Pre-wired conveyor sections are networked with bus technology and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system
that is easy to maintain. 

MDR BELTED 30"
DECLINE

Hilmot’s MDR Belted Decline modules have a high friction belt that holds product in location and helps maintain product alignment, perfect for print and apply applications, small and light products
and bags. Higher angles are possible depending on the application. Pre-wired conveyor sections are networked with bus technology and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system
that is easy to maintain. 

MDR BELTED 30"
INCLINE

Hilmot’s MDR Belted Incline modules
have a high friction belt that holds product
in location and helps maintain product alignment, perfect for print and apply applications, small and light products and bags. Higher angles are possible depending on the application. Pre-wired conveyor sections are networked with bus technology and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system
that is easy to maintain. 

MDR BELTED 36"
HORIZONTAL

Hilmot’s MDR Belted Horizontal modules have a high friction belt that holds product in location and helps maintain product alignment, perfect for print and apply applications, small and light products
and bags. Higher angles are possible depending on the application. Pre-wired conveyor sections are networked with bus technology and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system
that is easy to maintain. 

MDR BELTED 36"
DECLINE

Hilmot’s MDR Belted Decline modules have a high friction belt that holds product in location and helps maintain product alignment, perfect for print and apply applications, small and light products
and bags. Higher angles are possible depending on the application. Pre-wired conveyor sections are networked with bus technology and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system
that is easy to maintain. 

MDR BELTED 36"
INCLINE

Hilmot’s MDR Belted Incline modules
have a high friction belt that holds product in location and helps maintain product alignment, perfect for print and apply applications, small and light products
and bags. Higher angles are possible depending on the application. Pre-wired conveyor sections are networked with bus technology and are easily configured for multiple applications. All electric operation ensures a consistent and quiet system
that is easy to maintain. 

GRAVITY ROLLER

CONVEYOR

Hilmot Gravity Roller Straight modules
are your most cost-effective solution for warehousing, loading, package sorting, and assembly or kitting application.
These conveyors are designed with
return downward flange for improved appearance, comfort and operator safety. The gravity roller conveyor is one of
the most common pieces of equipment found in distribution centers
and warehouses. 

Inquiries? Go Here

  • LinkedIn Clean
  • w-facebook
  • YouTube Clean
  • Twitter Clean

Shop The Hilmot

E-commerce Store

Hilmot, LLC | 11925 W Carmen Ave Milwaukee, WI 53225  | 414-446-4900

© 2019 by Hilmot LLC