Series 1000 - Standard MDR

» Return to Product Catalog
	View Flyer More Info (800) 799-4492 Additional Photos

Description

Hilmot's divert modules are offered in tri-directional or bi-directional models. Bi-directional modules have one 30° spur mounted in either the right hand (RH) or left hand (LH) divert position. Tri-directional modules have two 30° spurs mounted one on each side. Two divert rates are available, low speed (20 cases per minute) or high speed (30 cases per minute). The internal divert mechanism has been cycle tested at 1 million cycles. The mainline divert module is 81" long and available in Hilmot's standard widths: 15", 21", 24", 27" and 30" widths. The Hilmot design is not limited to a minimum between frame size. The 7-1/2" deep side channels on both the spur(s) and the bed continue the same Hilmot profile. Cable trays are utilized for routing wire within the bed frame. Drive rollers are grooved to accept hi tensioned urethane O-rings to transmit the torque to the idler rollers that complete the zone length. The idler rollers are made with flow coat galvanized tubing.

1. Built-in photo eye, one per zone
2. Pre-wired, networked with bus technology
3. Motorized rollers 24VDC brushless, geared or gearless
4. Shroud or fascia
5. PLC- or PC-based control or platform
6. Precision bearings in the idler rollers

Video Sample Video 1 View (1.32 MB) Video 2 View (1.15 MB) Are you experiencing video problems? Download the latest Windows Media Player Click Here

» PREVIOUS PAGE